Battery to Battery Charger Pro Batt Ultra(Last Updated On: April 22, 2018)
Battery to Battery Charger
Simply connect the battery to battery charger between the battery being charged and the battery you wish to charge.
It will fast charge batteries as you cruise along without the need for complex wiring without touching your alternator voiding the alternator’s warranty and tampering with the electronic control units (ECUs).
The Pro Charge Ultra has 11 different charging characteristics for corresponding types of batteries: Gel, AGM, sealed, open, calcium, LiFePO4.
Battery to Battery Charger Features:
- Multiple Activation Modes: Automatic for most non-vehicle applications,
- Manual for remote activation.
- Regenerative braking (requiring ignition feed),
- 100% fireproof plastic box.
- No screws to corrode.
- Thermal power reduction.
- Multi-stage fan cooling
- 6) Night Time Setting: This allows the unit to run at half the power to keep the fan noise quiet
- 7) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
- 8) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). It does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
- 9) Customizable Profile: Choose your own charging profile on the front panel.
- 10) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
- 11) 4 stage battery charging: 5-20 times faster charging than a stand-alone alternator.
- 12) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
- Remote control optional.